So
your Android device has chosen to take a vacation and won’t boot
properly? This situation isn’t fun. Troubleshooting it is even less fun.
The problem could be related to an errant app, corrupted Android OS, or
bad hardware. Here are the steps you can take if your Android won’t
start.
1. Pull the Battery
For
almost any issue where an Android device won’t start, I always suggest
to pull the battery (if it’s removable) first and leave it out for about
20 seconds. Reinstall the battery and see if the issue persists. This
step may not seem like it would work, but I know first-hand that it has
helped numerous Android users.
2. Try a Soft Reset
On most Android devices, you can press and hold the “Volume Down” and “Power” buttons simultaneously for about 20 seconds to soft reset the device.
3. Remove Connected Hardware
If
you have an SD card or any other items plugged into the device, unplug
them. A bad SD card or headset can cause problems on rare occasions.
4. Ensure Device Has Enough Power
If
your device won’t turn on at all, or is stuck in a startup loop, it may
not have enough power. Attach the power adapter to the device and plug
it into a wall outlet. Don’t use a connection to a computer or other
device as the power you’d get is not sufficient to power most Android
devices on right away.
Another
issue could be the actual battery. See if you can borrow a battery from
a friend with a similar device and give that a try. If not, you may
want to purchase a new or used battery and try it out. Return the
battery to the store if it doesn’t help.
5. Start in Safe Mode
If
you installed software that isn’t compatible with your device or
malfunctions, it can cause the system to hang at a blank screen or
continually force close items. In either case, you’ll want to find out
how to start your device in Safe Mode. Safe Mode will start the device
with only the base software required to start the device. This will
usually allow you to access the Android OS so that you can remove
whatever app may be causing the issue.
Most devices start in Safe Mode by pressing and holding the Menuor Volume Down button
while you power the device on. If you’re not sure how to start your
particular device in Safe Mode, search the Interwebs or check the
documentation provided with your Android device.
6. Factory Hard Reset
If
you’ve tried all of the above steps and nothing seems to work, you may
want to perform a factory hard reset on the device. Doing so will wipe
all data from the memory of the device (usually not SD card data like
music or photos).
There
are usually ways to perform a factory hard reset using a hardware
button combination before the Android OS loads. Look in your manual or
search for what the button combination is for your device. They are
different for nearly every device. If you’re not sure how to factory
reset your device, check the documentation provided with your hardware.
7. Repair
If
a none of the above steps work, there may be a hardware issue that you
are unable to solve yourself. At that point, I would seek help from the
manufacturer or the retail store that sold you the device. It is likely
that the device has a hardware issue that cannot be repaired without
extensive troubleshooting from the manufacturer.
No comments:
Post a Comment